Forno Bravo Professionale 120 FA 48-Inch Commercial Hybrid Pizza Oven — Fully Assembled

Available Now!

Forno Bravo SKU: FPRO120-FA-F

$16,400.00

Put a compact commercial refractory oven into production without building the core or metal surround on site. The Professionale 120 FA arrives as an assembled oven and metal enclosure on a steel tray; the included stand is set and attached at the site. It suits kitchens that prioritize commercial performance and straightforward installation over a custom showpiece façade.

  • Right-sized production: The 48 × 59-inch floor is rated for 6–7 10-inch pizzas at once.
  • Commercial thermal core: A 3-inch refractory dome, 2.5-inch NSF-4 floor, and thick ceramic insulation support repeat service and recovery.
  • Factory-built oven: Includes the completed oven and metal enclosure on a steel tray, plus an insulated door with thermometer, decorative brick arch, and black stand that is installed onsite.
  • Indoor hybrid SKU: The -F configuration adds the self-modulating commercial gas system and permitted limited wood use; Forno Bravo documents and certifies this gas package for indoor installations.
  • Gas service: Confirm NG or LP, the control package, a dedicated 20-amp 120 VAC circuit, ventilation, and local approvals.
  • Model / SKU: Professionale 120 FA / FPRO120-FA-F
  • Cooking floor: 48 × 59 in.
  • Typical heat-up estimate: about 75 minutes
  • Pizza capacity: 6–7 10-inch pizzas at once
  • Maximum manufacturer rating: above 900°F
  • Commercial gas system: self-modulating, up to approximately 100,000 BTU

Plan for freight delivery, forklift placement of the oven onto the included stand, structural support, stand attachment, anchoring, service access, and an authority-approved commercial ventilation system. Chimney or hood components, tools, pre-cure service, and installation labor are separate unless shown on the order. This gas-equipped configuration is intended for indoor installation. Confirm the current drawing and site approvals before purchase.