Coyote C1LINER Outdoor Vent Hood Power Pack — 36, 42 & 48 Inch

Available Now!

Coyote SKU: C1LINER36

$1,799.00

C1LINER36 — for grills up to 30 in
C1LINER42 — for grills up to 36 in
C1LINER48 — for grills up to 42 in

Build Coyote ventilation performance into a custom outdoor hood enclosure. The Coyote C1LINER is a stainless-steel power pack offered in three sizes for covered outdoor cooking areas. It includes baffle filters, a grease rail, variable-speed controls, Heat Sentry response, integrated task lighting, and a 10-inch duct adapter.

Blower required: C1BLOW1200 is mandatory, non-substitutable, and sold separately. The surrounding custom enclosure, ductwork, roof/wall cap, and electrical connection are project-supplied.

  • C1LINER36: 11-1/16 H × 34-7/16 W × approximately 28-3/8 D inches; for grills up to 30 inches wide
  • C1LINER42: 11-1/16 H × 40-7/16 W × approximately 28-3/8 D inches; for grills up to 36 inches wide
  • C1LINER48: 11-1/16 H × 46-7/16 W × approximately 28-3/8 D inches; for grills up to 42 inches wide
  • Outdoor ventilation power pack for integration into a custom hood enclosure
  • Removable dishwasher-safe baffle filters and grease rail
  • Variable-speed blower control and Heat Sentry response
  • Integrated task lighting
  • 10-inch round duct connection
  • Design the custom opening from the exact model drawing and physical unit; do not use nominal width as the finished cutout.
  • Install under a protective roof, maintain at least 36 inches above the cooking surface, and exhaust outdoors.
  • Use short, straight 10-inch round metal ductwork and maintain service access to the power pack and blower.
  • The 120VAC system requires a qualified, grounded hardwired connection and GFCI protection under applicable codes.
  • Not intended for use over charcoal grills.

Lighting note: Coyote resources conflict on LED versus halogen lamps. Verify the physical unit and rating label before specifying replacement lamps.