Coyote CJAKTC1PB Insulated Jacket for C1PB & C3PB Power Burners

• Designed for Coyote C1PB and C3PB built-in Power Burners
• 304-grade stainless-steel construction
• Corrects the common double-side-burner fit misconception
• Provides the corresponding heat barrier for qualifying combustible-island installations
• Hangs from the countertop without support underneath

• Model / SKU: CJAKTC1PB
• Configuration: Built-in insulated jacket
• Material: 304-grade stainless steel
• Compatible models: C1PBLP, C1PBNG, C3PBLP, and C3PBNG
• Overall dimensions (H × W × D): 11 × 24-7/8 × 22-3/4 inches
• Required jacket cutout (H × W × D): 11 × 22-1/8 × 21-7/8 inches
• EAN: 653341981400
• Included: One insulated jacket; Power Burner sold separately

Use the corresponding Coyote insulated jacket when combustible material is within the manufacturer-specified area of the appliance frame. The jacket does not replace required ventilation, clearances, gas connections, or other installation procedures.

• Provide at least two island vents, each measuring at least 20 square inches and open to fresh exterior air.
• Position propane ventilation low and natural-gas ventilation high, following the instructions for the exact burner model.
• Do not box in or support the jacket from below, and do not block its vents or rear openings.
• Verify all dimensions, clearances, fuel connections, and local-code requirements before construction.
• Professional installation is recommended.

• CJAKTC1PB Product Page
• C1PB Installation Guide
• C3PB Installation Guide